Singapore SingTel, M1,Stahub internet APN setting for mobile phones

M1, Starhub, Singtel GPRS 3G setting
The internet config settings seem to be all over the place, so here’s a compilation of the 3G/GPRS/SMS/MMS Configuration Settings.

If you have a device and telco combination that’s not in the list below, and managed to setup your 3G/GPRS, please feel free to add on to the thread with your settings, using format similar as those below.

SingTel GPRS: Pocket PC Phone/Smartphone
APN: internet
User ID: 65IDEAS
Password: ideas
MMS Server URL: mms.e-ideas.com.sg:10021/mmsc
Link: http://www.trendsmob…102&ParentID=97

SingTel GPRS (hi Card): Pocket PC Phone/Smartphone
APN: internet
User ID: 65xxxxxxxx (phone number, e.g. 6591234567)
Password: 65ideas

SingTel GPRS: Pocket PC with Sony Ericsson Phone via IR/BT
Dial Number: *99***A# (where A is the CID aka External ID)
User name: 65xxxxxxxx (phone number, e.g. 6591234567)
Password:
Extra modem command:
Proxy server:
Link: http://www.ppcsg.com…showtopic=30479

SingTel 3G: Pocket PC with Sony Ericsson 3G Phone via IR/BT
Remark: You can try these settings if the GPRS Settings above do not work.
Dial Number: *99***A# (where A is the CID aka External ID)
User name: 65xxxxxxxx (phone number, e.g. 6591234567)
Password:
Extra modem command: Z
Proxy server: proxy.e-ideas.com.sg
Port: 8080
Link: http://www.ppcsg.com…ndpost&p=510718

SingTel GPRS: Pocket PC with Nokia Phone via IR/BT
Dial Number: *99#
User name: 65xxxxxxxx (phone number, e.g. 6591234567)
Password:
Extra modem command: +cgdcont=1,”ip”,”internet”
Proxy server:

SingTel GPRS: Pocket PC with Motorola Phone via IR/BT
Dial Number: *99*0*1*1#
User name: 65xxxxxxxx (phone number, e.g. 6591234567)
Password:
Extra modem command: +cgdcont=1,”ip”,”internet”,”0.0.0.0″
Proxy server:

SingTel GPRS: Pocket PC with Siemens Phone via IR/BT
Dial Number: *99***1#
User name: 65xxxxxxxx (phone number, e.g. 6591234567)
Password:
Extra modem command: +cgdcont=1,”ip”,”internet”;^sgauth=1
Proxy server:

M1 GPRS: Pocket PC with Sony Ericsson Phone via IR/BT
Dial Number: *99***A# (where A is the CID)
User name: 65xxxxxxxx (phone number, e.g. 6591234567)
Password: user123
Link: http://www.ppcsg.com…showtopic=30547

M1 GPRS: Pocket PC with Siemens Phone via IR/BT
Dial Number: *99***1#
User name: 65xxxxxxxx (phone number, e.g. 6591234567)
Password: user123
Extra modem command: +cgdcont=1,”ip”,”sunsurf”;^sgauth=1
Proxy server:

M1 GPRS: Pocket PC with Nokia Phone via IR/BT
Dial Number: *99#
User name: 65xxxxxxxx (phone number, e.g. 6591234567)
Password: user123
Extra modem command: +cgdcont=1,”ip”,”sunsurf”
Proxy server:

M1 GPRS: Pocket PC Phone/Smartphone
APN: sunsurf
User ID: 65
Password: user123
MMS Server URL: 172.16.14.20:8002
Link: http://www.trendsmob…101&ParentID=97

M1 GPRS (M Card): Pocket PC Phone/Smartphone
APN: miworldmcard
User ID: 65xxxxxxxx (phone number, e.g. 6591234567)
Password: user123

StarHub GPRS: Pocket PC with Motorola Phone via IR/BT
Dial Number: *99*0*1*1#
User name:
Password:
Extra modem command: +cgdcont=1,”ip”,”shwapint”
Proxy server:

StarHub 3G/GPRS: Pocket PC Phone
Starhub SMS Centre no :+6598540020
APN (Prepaid card): shppd
APN (Postpaid card): shwapint
User name:
Password:
MMS Server URL: mms.starhubgee.com.sg:8002
Link: http://www.trendsmob…114&ParentID=97

General Configuration for 3G/GPRS
GPRS/MMS Configuration Guides for all 3 Telcos
PDF Guide for SingTel GPRS over IR/BT with PPC
General Settings for SingTel
Configuration Guides for M1
StarHub Configuration Guides
Step by Step Manual Configuration Guide

Sometimes, the GPRS settings above may not be sufficient, e.g. some people may want specific GPRS profile setting. So, here’s a list.

IDEAS WAP
APN: e-ideas
Username: 65IDEAS
Password: ideas
Proxy: 165.21.42.84
Port: 8080

IDEAS Internet
APN: internet
Username: 65IDEAS
Password: ideas

hi Card (SingTel Prepaid)
APN: hicard
Username: 65 (e.g. 6591234567)
Password: 65ideas

MiWorld Mobile (WAP)
APN: miworld
Username: 65
Password: user123
Proxy: 172.16.1.23
Port: 8081

Sunsurf Mobile
APN: sunsurf
Username: 65
Password: user123

M Card (M1 Prepaid)
APN: miworldmcard
Username: 65 (e.g. 6591234567)
Password: user123

Gee! 3G/GPRS (WAP)
APN: shwap
Proxy: 10.12.1.2
Port: 80

StarHub Internet
APN: shwapint

GREEN Prepaid (StarHub)
APN: shppd

M1
GPRS Configuration
To set up GPRS on your GPRS-enabled PocketPC phone, just perform the following steps:
1. From the Start Menu, Go to Settings–> Connections Tab–> Connections
2. Select ” Add a new modem connection” under My ISP
3. Enter a preferred name for your connection, e.g. M1 GPRS
4. Select Cellular Line (GPRS) option under “select a modem” and tab “Next”
5. Enter the Access Point Name as “sunsurf” and tab “Next”
6. For Username, leave it blank
7. For Password, leave it blank
8. Leave domain blank and tab “Advance”
9. Ensure option “Use server-assigned IP address” is selected
10. Ensure options “Use software compression” and “Use IP header compression” are unselected
11. Tab “Servers” tab and ensure that “User server assigned addressees” is checked
12. To enjoy the internet over GPRS, simple tap the “G” icon at the top bar of your screen. A bubble will appear, giving you the option to connect to your carrier’s GPRS network.
13. To disconnect, simply hold the “end call” button.
MMS Configuration
To set up GPRS on your GPRS-enabled PocketPC phone, just perform the following steps:
Connections Portion
1. From the Start Menu, Go to Settings–> Connections Tab–> Connections
2. Select ” Add a new modem connection” under My Work Network
3. Enter a preferred name for your connection, e.g. M1 MMS
4. Select Cellular Line (GPRS) option under “select a modem” and tab “Next”
5. Enter the Access Point Name as ” miworld” and tab “Next”
6. For Username, leave it blank.
7. For Password, leave it blank.
8. Leave domain blank and tab “Advance”
9. Ensure option “Use server-assigned IP address” is selected
10. Ensure options “Use software compression” and “Use IP header compression” are unselected
11. Tab “Servers” tab and ensure that “User server assigned addressees” is checked
12. Tab “OK” and select the “Proxy Settings” tab
13. Ensure “This network connects to the Internet” and “The network uses a proxy server to connect to the Internet” options are checked
14. Tab the “Advance…” button
15. Under WAP, enter “172.16.1.23″ and ensure the WAP port is defaulted at “9201″
Messaging Portion
16. Goto “Start–> Messaging–> Menu–> MMS Settings–> MMS Default–> “Edit”
17. Fill in the settings as follows:
Profile Name- M1 MMS
IP Address- 172.16.14.10
Port- 9201
MMSC- http://172.16.14.20:8002/
Data Connection- My Work Network
Gateway- WAP 1.0 Gateway
18. Tap “Done”
19. Set as Default M1 MMS
20. You are ready to send a MMS
Note
a. You may need to apply for the use of GPRS with your carrier, depending on the carrier and mobile plan you are on.
b. Charges apply for the use of GPRS. Please consult your carrier for the rates/charges applied.
c. The above settings are tailored for glofiish Windows Mobile series.

About these ads
This entry was posted in Uncategorized and tagged , , , , , , . Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s